MobileCom XE
The Western DataCom MobileCom XE cellular
modem is the next evolution in cellular data technology. Utilizing
3G technology, the MobileCom XE is available in EV-DO (1x Evolution-Data
Optimized) or HSDPA (High-Speed Downlink Packet Access) versions,
providing a wide range of applications for all major cellular
carriers. The MobileCom XE motherboard is capable of holding
either a EV-DO or HSDPA PCI Express Minicard. This module provides
service for Verizon, Sprint or Alltel on the EV-DO network or
Cingular on the HSDPA network.
Built on Qualcomm technology using a Sierra Wireless PCI Express
Mini Card the MobileCom XE is a future proof design capable of
easily adapting to the latest technology with the change of a
module. An embedded Freescale processor provides enough processing
power to accommodate up to EV-DO Rev C bandwidths providing unprecedented
product life.
Communications is maintained via 10/100 Ethernet via Console
(AT Commands) or web graphical user interface. In addition the
integrated GPS receiver provides location tracking services over
serial RS-232 or via IP over the Ethernet interface. Also capable
of providing routing and onboard VPN capabilities the MobileCom
XE is a leading edge product design that makes the best use of
its capabilities.
The MobileCom XE operates using 1xEV-DO or HSDPA
cellular data technologies, offering the widest variety of application
scenarios in a single card. EV-DO Rev 0 offers data rates up
to 2048 Kbps downstream and 153Kbps updstream, where as EV-DO
Rev A provides a theoretical maximum of 1.8Mbps updstream and
3.1Mbps downstream. UMTS offers data rates up to 1920 Kbps.
The MobileCom XE is compatible with the Cisco 3200
Series rugged chassis (thermal plates optional).
The MobileCom XE is backwards compatible to 1xRTT
on the CDMA network and GSM, GPRS, EDGE and UMTS on the GSM networks.
This backward compatibility provides uninterrupted operation
when roaming between networks.
The optional integrated GPS receiver is located
on the bottom side of the printed circuit board and provides
industry standard NMEA data utilizing the SurfII chipset. Output
is available on a serial RS-232 interface or via Ethernet and
is compatible with most GPS software applications utilizing the
NMEA data format.
Western DataCom has also completed testing with
a dual function antenna. This antenna has dual connectors for
combining CDMA/GPRS and GPS into a single package. It is available
for both internal and external applications, with or without
magnetic mount.
Carrier
Certifications
CDMA Specifications
- IS856 (CDMA 1XEV-DO)
- IS-2000 (CDMA 1xRTT)
- Serial RS-232 Interface
- IS-707-A Data
- IS-95A/B
- Support for gpsOne
GSM/GPRS Specifications
- 2100 MHz UMTS
- 850/1900 MHz UMTS (Power Class 3)
- 850 MHz GSM/GPRS/EDGE
- 900 MHz GSM/GPRS/EDGE
- 1800 MHz GSM/GPRS/EDGE
- 1900 MHz GSM/GPRS/EDGE
- EDGE - Power Class E2
- PCS/DCS Power Class 1
- GSM - GMSK Power Class 4
GPS Specifications
- 12-channel, L1 1575.42 Mhz
- Code-plus-carrier tracking (carrier-aided tracking)
- Velocity, up to 500 m/s
- Acceleration, up to 5G
- 12 satellites simultaneously
- Horizontal accuracy – better than
2.8 meters (CEP), 4.9 meters 2 dRMS
- 3D accuracy – better than 5 meters
(SEP)
- Time accuracy – better than 100
ns (absolute), 40 ns (1 sigma)
- Serial RS-232 Interface
Antenna Specifications
- Internal and External Versions
- 1575.42 Mhz & 824-896 Mhz
- Dual SMA Male Connectors
The MobileCom XE is available in its standard format, PC/104 Plus,
as well as in a rugged standalone platform.
OS Feature Set
- Standard - 1xEV-DO/HSDPA w/ serial GPS
- Plus - 1xEV-DO/HSDPA w/ Ethernet GPS, web GUI
- Advanced - 1xEV-DO/HSDPA w/IPSec, web GUI
